Journal of Engineering Sciences / Журнал інженерних наук
Permanent URI for this collectionhttps://devessuir.sumdu.edu.ua/handle/123456789/34326
Browse
4 results
Search Results
Item Experimental studies on oscillation modes of vibration separation devices(Sumy State University, 2021) Дем`яненко, Марина Миколаївна; Демьяненко, Марина Николаевна; Demianenko, Maryna Mykolaivna; Volf, M.; Павленко, Іван Володимирович; Павленко, Иван Владимирович; Pavlenko, Ivan Volodymyrovych; Ляпощенко, Олександр Олександрович; Ляпощенко, Александр Александрович; Liaposhchenko, Oleksandr OleksandrovychDespite the rapid development of alternative energy sources, the role of hydrocarbons in the global fuel and energy balance remains significant. For their transportation and further processing, pre-processing is carried out using a set of equipment. In this case, the mandatory devices are separators. In terms of specific energy consumption and separation efficiency, methods based on the action of inertia forces are optimal. However, standard designs have common disadvantages. A method of dynamic separation is proposed to eliminate them. The proposed devices are automatic control systems. The object of regulation is hydraulic resistance, and elastic forces are the regulating actions. Aerohydroelastic phenomena accompany the operation of dynamic separation devices. Among them, the most interesting are flutter and buffeting. Oscillations of adjustable baffles accompany them. It is necessary to conduct a number of multifactorial experiments to determine the operating parameters of dynamic separation devices. In turn, physical experiments aim to identify patterns and features of processes occurring during vibration-inertial separation (i.e., the dependence of various parameters on velocity). Therefore, the article proposes a methodology for carrying our physical experiments on dynamic separation and a designed experimental setup for these studies. As a result, the operating modes of separation devices for different thicknesses of baffle elements were evaluated. Additionally, the dependences of the adjustable element’s deflections and oscillation amplitudes on the gas flow velocity were determined for different operating modes of vibration separation devices.Item Numerical simulation of the perforated shell’s oscillations in a vibrational priller(Sumy State University, 2020) Дем`яненко, Марина Миколаївна; Демьяненко, Марина Николаевна; Demianenko, Maryna Mykolaivna; Volf, M.; Скиданенко, Максим Сергійович; Скиданенко, Максим Сергеевич; Skydanenko, Maksym Serhiiovych; Yakovchuk, V.; Павленко, Іван Володимирович; Павленко, Иван Владимирович; Pavlenko, Ivan Volodymyrovych; Ляпощенко, Олександр Олександрович; Ляпощенко, Александр Александрович; Liaposhchenko, Oleksandr OleksandrovychThe widespread catalysts and nuclear fuel production are the sol-gel technology, including several stages, namely, the raw materials preparation, dispersing it into drops, the granules formation in gas and then in liquid media, granules removal with liquid separation. The vibration granulator is proposed to use on the dispersion stage. One of the problems in their development is determining the vibrational characteristics of a perforated bucket filled with liquid to a certain level. Considering that vibrations are transmitted from the emitter disk through the liquid melt and cause vibrations of the perforated shell, in research, it was decided to use the Fluent Flow and the Transient Structural modules of the ANSYS Workbench software. As a result, numerical simulation results of the emitter disk vibration effect on the cylindrical body are presented. Also, parameters of a discrete mathematical model are evaluated by the bucket vibrations characteristics. The corresponding model considers the inertial, stiffness, and damping properties of functional elements. Additionally, according to the modal analysis results of the priller body, it was determined the eigenfrequencies of the hydromechanical system. Finally, based on the numerical simulation results and their analysis using Fourier transformations, it was determined that the oscillations of the lower part of the bucket, consisting of two harmonic oscillations that equal 230 Hz and 520 Hz.Item The Solution of the Stationary Aeroelasticity Problem for a Separation Channel with Deformable Sinusoidal Walls(Sumy State University, 2020) Дем`яненко, Марина Миколаївна; Демьяненко, Марина Николаевна; Demianenko, Maryna Mykolaivna; Volf, M.; Pavenko, V.; Ляпощенко, Олександр Олександрович; Ляпощенко, Александр Александрович; Liaposhchenko, Oleksandr Oleksandrovych; Павленко, Іван Володимирович; Павленко, Иван Владимирович; Pavlenko, Ivan VolodymyrovychOne of the most urgent problems concerning the design of inertial separation devices is the failure of the trapped liquid film from the contact surfaces due to the contact with the turbulent gas-liquid flow. For extension of the range of the effective inertial separation, a method of dynamic separation was proposed using the developed separation device with deformable sinusoidal walls. In this regard, the article is aimed at the development of the general methodology for the determination of the impact of hydrodynamic characteristics on the shape parameters for the deformed separation channel. The proposed approach is based on both physical and geometrical models. The first one allows obtaining compliance of deformable walls as a result of pressure distribution in the separation channel as a result of numerical simulation. The second one allows for obtaining variations of the main geometrical parameters of the proposed model using transfer functions. The relevancy of the proposed methodology was proved by the values of the relative errors for evaluating the variations of the amplitude and the radius of curvature.Item Static calculation of the dynamic deflection elements for separation devices(Sumy State University, 2017) Павленко, Іван Володимирович; Павленко, Иван Владимирович; Pavlenko, Ivan Volodymyrovych; Ляпощенко, Олександр Олександрович; Ляпощенко, Александр Александрович; Liaposhchenko, Oleksandr Oleksandrovych; Demianenko, M.M.; Starynskyi, O.E.The following paper considers the influence of acoustic oscillations on multiphase flows on their suspended particles, which can be destroyed or coagulated by vibrations. Considering this, the method of extension of application range of the dynamic separation element as vibrocoagulants due to the use of hydroaeroelasticity phenomena, namely flutter, has been proposed. There were considered the problems of development an engineering method for calculating dynamic separation elements, the main of which is the analytical solution of the hydroaeroelasticity problem. This work takes the first step to its development, considering the previous elastic elements deformation that has a significant effect on the flutter frequency. The state of their static equilibrium was conducted with the use of analytical dependencies of the finite element method. The bimodal finite elements with six degrees of freedom were used for dynamic deflection elements. As the result, there was determined the stiffness of pre-deformed plates and their maximum and minimum possible deflections. The functions of the median surface deflection in the form of a cubic polynomial were used in the model. In particular, there were considered the peculiarities of numerical modelling of coupled problems of gashydrodynamics flows and structural dynamics using the ANSYS Workbench, namely Fluent Flow and Transient Structural modules, which are combined with System Coupling. Also, the peculiarities of different approaches to multi-phase flow modelling are indicated. They are interesting not only by distribution of particles in the stream core, but also by the entrapped liquid film motion on the deposition surfaces.