Факультет електроніки та інформаційних технологій (ЕлІТ)

Permanent URI for this communityhttps://devessuir.sumdu.edu.ua/handle/123456789/20

Browse

Search Results

Now showing 1 - 10 of 76
  • Item
    Infuence of the thermal annealing on the morphological and structural propertie
    (Springer Nature, 2020) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Пшеничний, Роман Миколайович; Пшеничный, Роман Николаевич; Pshenychnyi, Roman Mykolaiovych; Vorobiov, S.; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Komanicky, V.; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych
    In this work, ZnO flms were deposited onto fexible polyimide substrates by ink-jet printing nanoinks containing polyolsynthesized nanocrystals. ZnO flms were annealed at 200–400 °C for 10 min and 60 min under the ambient atmosphere. The morphological (shape, size, size distribution, surface roughness), structural (phase composition, crystal structure), optical (band gap, transmission coefcients) properties and the chemical composition of the synthesized nanocrystals and the obtained flms were studied. X-ray difraction analysis, transmission and scanning electron microscopies, atomic force microscopy, Fourier-transform infrared (FTIR) and optical spectroscopies, and energy-dispersive X-ray spectroscopy (EDS) were used to study the properties of obtained ZnO materials. The flms, annealed at Ta=400 °C for ta=60 min, and nanocrystals, synthesized for tg=120 min, have the good fundamental characteristics for application in the microelectronic devices, especially in solar cells and thermoelectric generators.
  • Item
    Cu2ZnSnS4, Cu2ZnSnSe4 Nanocrystals As Absorbers In 3rd Generation Solar Cells
    (Igor Sikorsky Kyiv polytechnic institute, 2020) Кахерський, Станіслав Ігорович; Кахерский, Станислав Игоревич; Kakherskyi, Stanislav Igorevich; Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Пшеничний, Роман Миколайович; Пшеничный, Роман Николаевич; Pshenychnyi, Roman Mykolaiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Опанасюк, Надія Миколаївна; Опанасюк, Надежда Николаевна; Opanasiuk, Nadiia Mykolaivna
    Наночастинки напівпровідникових сполук Cu2ZnSnS4, Cu2ZnSnSe4 були одержані за допомогою метода поліольного синтезу. Методами сканувальної мікроскопії та рентгендифрактометрії досліджені їх морфологічні і структурні властивості. Проведено порівняння особливостей росту наночастинок обох сполук. Одержані в результаті частинки були використані для створення наночорнил, що використовувались для друку поглинальних шарів сонячних перетворювачів з використанням 2d та 3d принтерів.
  • Item
    Luminescence study of II-VI-based thin films deposited by close-spaced vacuum sublimation technique
    (Nova Science, 2019) Іващенко, Максим Миколайович; Иващенко, Максим Николаевич; Ivashchenko, Maksym Mykolaiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Гнатенко, Юрій Павлович; Гнатенко, Юрий Павлович; Hnatenko, Yurii Pavlovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych
    CdSe, Cd1-xZnxTe ternary compound, CdS:Dy rare-earth element doped II-VI compound) at different substrate temperatures is performed. In all cases of studied samples they are deposited onto non-oriented substrates using the close-spaced vacuum sublimation technique (CSVS) which makes a possibility to obtain films with optimal crystalline and optical quality. The study of the PL spectra of the investigated films makes it possible to determine their optimal growth conditions in order to obtain the films of good optical quality. The obtained results are in good agreement with the structural investigations, which we have carried out earlier using the X-ray diffraction technique. In all cases of investigated samples on PL-spectra there were observed lines that correspond to the residual impurities, which are typical for II-VI compounds (Li, Na, Cu, P). Moreover there were observed an additional lines which may be caused by the presence of point defects in crystalline structure, donor- acceptor pairs recombination processes, phonon replicas, etc.
  • Item
    Quality improvement of CZTS thin films deposited by spray pyrolysis method using pulsed Nd: YAG laser irradiation
    (Elsevier, 2019) Шамардін, Артем Володимирович; Шамардин, Артем Владимирович; Shamardin, Artem Volodymyrovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Grace, O.; Kaupuzs, J.; Medvids, A.; Vecstaudza, J.
    In this work, thin films of Cu2ZnSnS4 (CZTS) were grown by spray-pyrolysis method and were irradiated by pulsed Nd: YAG laser. Their morphological, chemical, structural and substructural characteristics were investigated using AFM, SEM, EDS, XRD and Raman spectroscopy. Upon laser irradiation, improvement of crystallinity, stoichiometry and surface morphology were observed in the obtained CZTS thin films with the normal distribution of newly-formed particles throughout the plane. It was shown that the laser processing by pulsed Nd: YAG laser is an alternative method to the traditional post-growth thermal annealing and can be used not only for local annealing but also for annealing in various depths in the films.
  • Item
    Effect of deposition temperature on the growth mechanism of chemically prepared CZTGeS thin films
    (John Wiley & Sons, Ltd., 2019) Шамардін, Антон Володимирович; Шамардин, Антон Владимирович; Shamardin, Anton Vladimirovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Medvids, Arturs
    The Cu2ZnSnGeS4 (CZTGeS) thin films were deposited by the spray pyrolysis method at different substrate temperatures without further sulfurization. The influence of various deposition temperatures on the surface morphology, microstructure, optical properties, chemical, and phase composition were investigated. The substitution mechanism of Sn/Ge in the crystal lattice of CZTGeS depending on deposition temperatures was studied. It was shown that a variation in substrate temperature has a strong effect on the surface morphology of the films. The X‐ray diffractometer (XRD), transmission electron microscope (TEM), and Raman spectroscopy (RS) analysis showed that CZTGeS films were polycrystalline with a kesterite‐type single‐phase structure and a preferential orientation of (112). The RS‐mapping analysis showed the distribution of intensities on the surfaces of the films. Optical measurements showed that CZTGeS films are highly absorbing in the visible region, and the optical band gap is shifted from 1.89 to 1.84 eV.
  • Item
    Determination of fundamental optical constant of Zn2SnO4 films
    (V. Lashkaryov Institute of Semiconductor Physics, National Academy of Sciences of Ukraine, 2017) Салогуб, Анна Олександрівна; Салогуб, Анна Александровна; Salohub, Anna Oleksandrivna; Возний, Андрій Андрійович; Возный, Андрей Андреевич; Voznyi, Andrii Andriiovych; Климов, Олексій Володимирович; Климов, Алексей Владимирович; Klymov, Oleksii Volodymyrovych; Safryuk, N.V.; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych
    Examined in this paper have been optical properties of polycrystalline films Zn2SnO4 deposited using the spray pyrolysis method within the range of substrate temperatures 250 °C to 450 °C in increments of 50 °C. The spectral dependences have been found for the following physical quantities: k(λ), n(λ), ε1(λ), ε2(λ) and defined as they change under the influence of substrate temperature Тs. Moreover, using the model by Wemple–DiDomenico it was calculated the dispersion energy Ео and Ed for this oxide. Two independent methods defined band gaps Zn2SnO4, which decreases from 4.21…4.22 eV down to 4.04…4.05 eV with increasing Тs from 250 °C up to 450 °C.
  • Item
    The optimization of functional layers of solar cells based on n-ZnMgO / p-CuO and n-ZnMgO / p-Cu2O heterojunctions
    (2017) Д`яченко, Олексій Вікторович; Дьяченко, Алексей Викторович; Diachenko, Oleksii Viktorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Гриненко, Віталій Вікторович; Гриненко, Виталий Викторович; Hrynenko, Vitalii Viktorovych
    In this paper, we present the results of the calculations of optical losses in the solar cell layers based on n-ZnMgO / p-CuO(p-Cu2O) heterojunctions with AZO and ITO front contacts. The calculations were carried out considering of light absorption in the auxiliary layers of the device. Thus, the spectral dependencies of transmittance in the absorber layer of solar cell were defined. It is made possible to optimize the design of the solar cells based on such heterojunctions
  • Item
    Опромінення за допомогою ND: YAG лазеру тонкої спрейпіролізної плівки CZTS для заліковування структурних дефектів
    (Сумський державний університет, 2017) Шамардін, А.В.; Істратов, М.Є.; Рекунов, Є.М.; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych
    Тонкі плівки CZTS розпиляли на підігріту до T = 623 K скляну підкладку методом пульсуючого спрей-піролізу. Товщина плівки становила 1,1 мкм. Після цього зразок опромінювали в атмосфері повітря за допомогою Nd:YAG лазера з використанням другої гармоніки λ = 532 нм з інтенсивністю I = 17,5 МВт/см2 в скануючому режимі. Для вивчення фазового складу до і після лазерного відпалу використовували метод рентгенівських дифракцій і спектроскопію комбінаційного розсіювання світла. Після опромінення на спектрах комбінаційного розсіювання світла і рентгенограмах спостерігалось зменшення напівширини піків і збільшення їх інтенсивності, що говорить про покращення кристалічної якості матеріалу.
  • Item
    The performance optimization of thin-film solar converters based on n-ZnMgO / p-CuO heterojunctions
    (Jadavpur University, 2017) Д`яченко, Олексій Вікторович; Дьяченко, Алексей Викторович; Diachenko, Oleksii Viktorovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Patel, P.B.; Panchal, C.J.; Priya, Suryavanshi; Kheraj, V.A.
    In this paper, we present the results of the calculations of optical losses in the solar cells layers based on heterojunction n-ZnMgO / p-CuO with ZnO and ITO frontal contacts. The calculations were carried out taking into account a light absorption in the auxiliary layers of the device. As a result, the spectral dependencies of transmittance Т() in the absorber layer of solar cell were defined. It is made possible to optimize the design of the solar cells based on such heterojunctions.
  • Item
    Thermoelectric properties of the colloidal Bi2S3-based nanocomposites
    (Jadavpur University, 2017) Доброжан, Олександр Анатолійович; Доброжан, Александр Анатольевич; Dobrozhan, Oleksandr Anatoliiovych; Опанасюк, Анатолій Сергійович; Опанасюк, Анатолий Сергеевич; Opanasiuk, Anatolii Serhiiovych; Курбатов, Денис Ігорович; Курбатов, Денис Игоревич; Kurbatov, Denys Ihorovych; Panchal, C.J.; Suryavanshi, P.; Trivedi, U.B.; Kheraj, V.A.
    In this work we present the proof of the concept of the novel strategy to improve the thermoelectric properties of Bi2S3based nanostructured bulk materials by blending the metallic nanoinclustions with the semiconductor nanoparticles forming the nanocomposites (NCts). The obtained NCts were composed of Bi2S3nanorods (length - 100 nm and width – 10 nm) and Ag nanoparticles (diameter - 2- 3 nm) synthesized by colloidal method. The morpohology, phase and chemical composition, electrical conductivity and Seebeck coefficient of NCts were investigated by using transmission electron microscopy (TEM), X-ray diffraction, energy dispersive X-ray analysis (EDAX), 4-point probes method and static dc-method. This strategy is the perspective way to improve the conversion efficiency of others thermoelectric materials.